GRAPHTEC CE6000 SERIES - Page 140

5-23
Supplement
Setting range is from 30 to 90.
The tool carriage moves in the Y direction,
while the media movies in the X direction.
Raising the numerical value in the following
situations will allow you to detect a
registration mark.
• When the media and registration mark
colors are similar.
• When you pass over the registration mark
point.
Lowering the numerical value in the
following situations will allow you to detect a
registration mark.
• When you detect a point where there is no
registration mark.
• When folds or stains on the media surface
are detected.
5 Press the [1] key (X).
SENSING LEVEL X adjusting screen is displayed.
6 Press the POSITION ( ) key and increase or decrease the
setting value.
7 Conrm the setting and press the POSITION ( ) key
(PREVIOUS).
SENSING LEVEL is selected and it will return to SENSING LEVEL
screen.
8 Press the [2] key (Y).
SENSING LEVEL Y adjusting screen is displayed.
Supplement
Setting range is from 30 to 90.
9 Press the POSITION ( ) key and increase or decrease the
setting value.
10 Conrm the setting and press the POSITION ( ) key
(PREVIOUS).
SENSING LEVEL is selected and it will return to SENSING LEVEL
screen.
Supplement
It will return to ARMS setting screen (4/4)
without changing the settings when you press
the POSITION ( ) key (CANCEL).
11 Conrm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS setting screen (4/4).
12 Press the [PAUSE/MENU] key.
It will return to default screen.