GRAPHTEC CE6000 SERIES - Page 151

5-34
4 Press the [3] key (MARK AUTO SCAN).
MARK AUTO SCAN setting screen is displayed.
5 Press the [1] key (On) or the [2] key (Off).
6 Conrm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS SETTING screen (3/4).
Supplement
It will return to EGISTRATION MARK setting
screen (3/4) without changing the settings when
you press the POSITION ( ) key (CANCEL).
7 Press the [PAUSE/MENU] key.
It will return to the default screen.