8-5
Supplement
It will return to MEDIA SETTING screen (1/2)
without changing the settings when you press
the POSITION ( ) key (CANCEL).
5 Press the [1] key (ON) or the [2] key (OFF).
AUTO PRE FEED is selected and return to AUTO PRE FEED screen.
6 Press the [2] key (FEED LENGTH).
FEED LENGTH setting screen is displayed.
Supplement
Feed length can be set in 0.1 m units.
Setting range is 0.5 m to 50.0 m.
Press the FAST key to change the setting
digits.
7 Press the POSITION ( ) key and increase or decrease the
setting value.
8 Conrm the setting value, and press the POSITION ( ) key
(CANCEL).
FEED LENGTH is selected and return to AUTO PRE FEED screen.
Supplement
It will return to MEDIA SETTING screen (1/2)
without changing the settings when you press
the POSITION ( ) key (CANCEL).
9 Conrm the setting and press the [ENTER] key.
Setting will be set, and it will return to MEDIA SETTING screen (1/2).
Supplement
[Pr] mark is displayed at the right of the screen
when AUTO PRE FEED is set. See "How to
Use Control Panel"
P.2-24
.
10 Press the [PAUSE/MENU] key.
It will return to default screen.
To Next Page
Loading...
