13-15
Supplement
Press the [3] key CANCEL CONDITION)
to return to the TEST menu screen without
printing the list.
6 Press the [1] key (DONE 1/2) or the [2] key (DONE 2/2).
Message to conrm tool position is displayed.
7 Move the tool carriage to print start position by pressing the
POSITION (
) key.
CAUTION
Do not place you hand around the moving
areas. The tool carriage will start moving, so
there is a chance of injury.
8 Conrm that movable parts of the tool and media can safely
operate and press the [ENTER] key.
Selected page of the CONDITION LIST is printed.
9 It will return to READY status when the printing is completed.
Supplement
Set the media and repeat steps 6 to 8 to print
different page at this point.
10 Press the [PAUSE/MENU] key.
It will return to READY status when the printing is completed.
To Next Page
Loading...
