13-19
5 Press the [3] key (DATA DUMP).
DATA DUMP start screen is displayed.
6 Conrm that the pen tool is set.
CAUTION
Do not place your hand around the moving
areas. The tool carriage will start moving, so
there is a chance of injury.
7 Conrm that operation area of tool and media is safe.
Supplement
It will return to TEST menu screen without
printing by pressing the [2] key (CANCEL DATA
DUMP).
8 Press the [1] key (DONE).
Output of the dump list starts.
Supplement
It will keep on printing until the power is turned
off once the printing is started by pressing the
[1] key (DONE).
9 Turn the power off to stop the printing.
To Next Page
Loading...
