GRAPHTEC CE6000 SERIES - Page 67

2-37
5 When you want to change the force, press the [3] key
(FORCE).
The screen below will appear.
Supplement
Press the [ENTER] key (SET) to conrm the
settings and return to the READY screen.
Press the [4] key (RETURN) to return to
the READY screen without changing any
settings.
The +0 value allows you to use the standard
force setting. If adjustment is necessary, you
can enter the ± adjusted value.
6 Press the POSITION ( ) keys to change the current value.
The force setting can be modied with the ± adjusted value.
When conrming the setting, press the [ENTER] key (SET).
Setting will be set, and it will return to default screen.