GW Instek GDS-2000E Series User Manual

MEASUREMENT
75
11. Press Clear to clear the expression
entry area.
12. Use the Variable knob and Select
key to create an expression.
Use the Variable knob to highlight a
source, function, variable,
operator, figure or measurement in
orange.
Press the Select key to make the
selection.
If a particular parameter is grayed
out, it indicates that that particular
parameter is not available at that
time.
Select
VARIABLE
Back Space
13. To delete the last parameter press
Back Space.
14. When the expression is complete,
press OK Accept.

GW Instek GDS-2000E Series Specifications

General

Brand	GW Instek
Model	GDS-2000E Series
Category	Test Equipment
Language	English