GW Instek GSP-9300 User Manual

GSP-9300 User Manual
134
6. Press Time Axis [F3] to set horizontal axis
parameters:
Ref. Value[F1]
Sets the starting time on
the time axis.
Ref. Pos[F2]
Shifts the waveform X
number of grid
subdivisions.
Scale/Div[F3]
Sets the grid division
scale when Auto Scale is
Off.
Auto Scale[F4]
Toggles auto-scaling
on/off.
7. Press Depth Axis[F4] to set depth (vertical)
parameters:
Ref.Value[F1]
Offsets the reference
position as a percentage
of the vertical scale/div.
Ref.Pos[F2]
Sets the reference
position of the waveform
on a vertical grid
subdivision (1:10).
Scale/Div[F3]
Sets the vertical grid
division scale when
Auto Scale is Off.
Auto Scale[F4]
Toggles auto-scaling
on/off.
8. Press Squelch[F6] to set carrier squelch level.
The squelch setting will suppress unwanted
noise of a certain level.

GW Instek GSP-9300 Specifications

General

Brand	GW Instek
Model	GSP-9300
Category	Measuring Instruments
Language	English