GW Instek GSP-9300 User Manual

GETTING STARTED
23
Frequency/
Bandwidth
settings
Displays the Start, Center and Stop frequencies,
RBW, VBW, Span and Sweep settings.
Entry/Message
area
This area is used to show system messages, errors
and input values/parameters.
Trace and
waveforms
Main display showing the input signals, traces
(page 81), limit lines (220) and marker positions
(94).
Sweep progress
bar
The sweep progress bar shows the progress of
slow sweeps (greater than 2 seconds).

GW Instek GSP-9300 Specifications

General

Brand	GW Instek
Model	GSP-9300
Category	Measuring Instruments
Language	English