GW Instek GSP-9300 User Manual

FILE
259
For screen shots:
Normal: Screen shot is saved
as is
Save Toner: inverts the image
file color to reduce ink when
printing.
For limit line:
Limit line 1~5
For correction:
Correction data 1~5
For sequence:
Sequence 1~5
For power meter:
Power state*
*see page 239 for details.
4. For trace data, press Format[F4] to select the
format type to save:
Trace:
Save trace data only
Trace+State:
Save trace and state data
5. Press Save To[F1] and select a destination
source:
Register 1~6:
Internal memory registers,
these internal registers are not
part of local memory
Local:
Internal memory
USB:
External memory
SD Card:
External micro SD card
6. After a destination has been selected, the file
can be named or saved immediately.
7. To name the selected file, press
Name[F5]. Name the selected file
using the F1~F7 keys, as shown
below or use the numeric keypad
to enter numbers.:
7 8 9
654
1 2 3
/0
Limitations:
 No spaces

GW Instek GSP-9300 Specifications

General

Brand	GW Instek
Model	GSP-9300
Category	Measuring Instruments
Language	English