GW Instek GSP-9300 - Page 264

GSP-9300 User Manual
262
See page 249 for details on file types:
State:
State data
Trace:
Trace data
Limit Line:
Limit line data
Correction:
Correction data
Sequence:
Sequence files
3. Press Destination[F3] to select the destination for
the file type if possible:
For State data:
Local state data (fixed, not
selectable)
For Trace data:
Trace1~4
For Limit Lines:
Limit line 1~5
For Correction:
Correction data 1~5
For Sequence:
Sequence 1~5
Recall File
1. Press Recall From[F1] and select a source
location:
Register 1~6:
Internal memory registers,
these internal registers are not
part of local memory
Local:
Internal memory
USB
External USB memory
SD Card:
External micro SD card
2. To Recall the selected file type, press Recall
Now[F4].
3. A message “Finish‼” will be displayed at the
bottom of the screen when the recall is
successful.
Note
The USB and micro SD card options will only be
available when a flash drive/SD card is inserted
into the front panel ports.