62
Figure 87 Installing the supercapacitor holder
c. Aligning the supercapacitor cable with the notch on the supercapacitor holder, insert the
connector end of the supercapacitor into the holder. Pull the clip on the holder, insert the
other end of the supercapacitor into the holder, and then release the clip, as shown in Figure
88.
Figure 88
Installing the supercapacitor
d. Connect the flash card on the storage controller to the supercapacitor. For more information,
see "Connecting the flash card on the Mezzanine storage controller."
e. Con
nect drive data cables to the Mezzanine storage controller. For more information, see
"Connecting drive cables."
9. Install the re
moved riser cards in PCIe riser connector 1 and 2. For more information, see
"Installing riser cards and PCIe modules."
10. Install the re
moved fan cage. For more information, see "Installing fans."
11. Install the removed air baffles. For more information, see "Installing air baffles."
12. Install the access panel. For more information, see "Installing the access panel."
To Next Page
Loading...
