Microlab
®
STAR Service Manual
1-1
1 Introduction
1.1 General Information
This Service Manual is a field service guide and is to be used only by Service
Technicians trained and / or authorized by HAMILTON Bonaduz AG.
Repaired units must meet the quality standards set by HAMILTON Bonaduz AG.
No part of this manual may be copied or handed on to a third party. Owners of
Service Manuals are registered and only they will be issued with update information
such as Service Manual Updates and Service Bulletins.
Attention: You should read User Manual Chapter 1 "General Information" before
repairing or servicing the system.
Attention: Never lift a fully assembled instrument (with carriers, racks, etc.) from one
work bench to another. First lock pipetting Arm X-movement and channels by using
protective covers from packaging.
Check instrument for level position and adjustments after placing on the new work
bench.
Attention: Good laboratory practice (GLP) is a must. Protect yourself before working
on the Microlab
®
STAR Instrument - wear safety gloves. Ensure that, where
applicable, decontamination has been carried out.
Attention: Be aware of moving Parts inside the Microlab Star Instruments e.g. when
ever working inside the Instrument, e.g. if not all covers are closed and the
Instrument has to be operated, e.g. via service software.
To Next Page
Loading...
