Microlab
®
STAR Service Manual
4-11
4.2.3.2 Power / Voltage
Using an Uninterruptible Power Supply (UPS) is highly recommended.
• The mains plug is on the left-hand side of the instrument towards the rear.
• The fuses for the instrument are situated under the mains power switch.
• Plug in the mains cables for the computer and the instrument into the same
electrical outlet.
Attention: Connect only to an earth-grounded outlet
Attention: For safety reasons, ensure that the appropriate Fuse is placed into the
mains power switch before switching on the instrument.
Fuses:
P/N 363012 Delayed action FUSE 3.15 A for 230 V∼
P/N 363013 Delayed action FUSE 6.3 A for 115 V∼
See section 2.2 Technical Specifications on page 2-6.
Voltage selector
Fuses
To Next Page
Loading...
