Microlab
®
STAR Service Manual
4-6
Unpacking the instrument (continued)
Instrument on pallet without top and surrounding covering.
Note: Instrument Panels (such as side and back Panels
4
) are placed on top
of Accessories boxes.
To avoid any damage (such as scratches) remove Instrument Panels from top of
accessories boxes and store them until they are to be assembled
Remove the two Accessories Boxes and their supporting foam blocks (3 square
blocks and 2 z-shaped blocks).
4.2.2.1 Accessory boxes
The contents of these two boxes can vary depending on what the customer ordered.
Check the packing list.
The items from these boxes must mounted on the Microlab
®
STAR Instrument as a
part of the installation.
Attention: Items for ML STAR and ML STAR IVD may vary, therefore ensure correct
parts are being used when setting up the Instrument.
4
Back Panels only for ML STAR IVD Instruments available
To Next Page
Loading...
