7-34
7.8.3 Replacement
Preliminary actions:
Uncover Pipetting Arm see section 7.4.3 Pipetting Arm on page 7-14.
Channels should remain on Pipetting Arm. Otherwise refer to section 7.7 Pipetting
Channels on page 7-26.
Hint: Remove Y-Spindles for better access to channels and Pipetting Heads.
Attention: Never switch on ML STAR Instrument while cables such as those
between Channel and Pipetting Head are not plugged in when replacing Pipetting
Heads as short circuits are possible.
To Next Page
Loading...
