Microlab
®
STAR Service Manual
8-10
8.2.3 Replacement
• Remove Left Deck Panel for access. See section 7.4.2 Deck Panels on page 7-7.
• Line Filter
• Disconnect all cables, then unscrew Line Filter and replace.
Screw P/N 400301 3 x
Screw P/N 257062 2 x
Screw P/N 400301 2 x
Lock Disc P/N 411002 2 x
• Power supply:
• Disconnect all cables, unscrew sheet metal from chassis, then unscrew Power
supply from sheet metal and replace Power supply.
Screw P/N 400656 4 x
The sheet metal is mounted with Screw P/N 400301 4 x to Power supply
• Power Distribution Board
• Disconnect all cables, then unscrew Power Distribution Board and replace
Power Distribution Board.
Screw P/N Screw P/N 400656 6 x
• Extension PCB
• Disconnect all cables, then unscrew Extension PCB and replace.
Screw P/N 403606 2 x
8.2.4 Reassembly
• Instructions are basically the reverse of those for disassembly.
To Next Page
Loading...
