Microlab
®
STAR Service Manual
12-18
12.4 Appendix D
12.4.1 Microlab
STAR Firmware Addresses:
• Master Module: C0 where 0 is the number zero
• X- drive Pipetting Arm Module: X0 where 0 is the number zero
• Pipetting Channel: P# where # is 1 to 9 and A to G
• Auto Load Module: I0 where 0 is the number zero
• Temperatured Controlled Carrier: T# where # is 1 or 2
• Wash station: W# where # is 1 or 2
• iSwap R0 where 0 is the number zero
12.4.2 Microlab
STAR Firmware Files:
Firmware file Description
• GRUC0S##.ACH Firmware for Master Module
(Pipetting Arm X drive Module included)
• GRUPXS##.ACH Firmware for Pipetting Channels
• GRUALS##.ACH Firmware for autoload drive
• GRUTXS##.ACH Firmware for Temperatured Controlled Carrier
• GRUWXS##.ACH Firmware for Wash station
• GRUR0SE##.ACH Firmware for iSwap
Where ## is the current Version of firmware