Microlab
®
STAR Service Manual
1-4
1.3 Service Manual Updates
As the instrument or parts of the instrument are constantly being improved, this
Service Manual will be updated regularly. Each Service Technician will be sent
update sets and is responsible for keeping his Service Manual up to date.
Necessary instructions on how to do this will be included in the update set. On
receipt of an update, follow the instructions on the cover page and then file the
cover page in the appropriate section.
1.4 Service News
Service news are sent to inform the Service Technician of new developments
without delay. File the service news in the appropriate section of the Service
Manual.
1.4.1 Upgrades
Will be announced via Service News. Basically all information will be found in
Service News. After replacing / upgrading of any component refer to section 6.9.3
Verification after replacement, or remounting on page 6-48.
1.4.1.1 Firmware upgrade
Refer to section 1.6.6 Updates on page 1-7.
1.4.1.2 Service Software upgrade
Refer to section 3.1.1 How to Install the Service Software on page 3-1 and section
3.4 Deinstallation of Service Software on page 3-7.
1.4.1.3 User Software upgrade
Refer to section 4.2.4.1 User Software Installation on page 4-14 and section 5.2.7
User Software Deinstallation on page 5-13.
To Next Page
Loading...