Hamilton Microlab STAR - Tools for Verification of ML STAR IVD

Microlab
®
STAR Service Manual
6-9
6.2.3 Tools for Verification of ML STAR IVD
Tool Description
Barcode Carrier P/N 185270 Supports verification of Barcode
reading of Autoload drive.
This item is part of the ML STAR IVD
shipment and the barcode verification
may performed by the customer.
See the maintenance menu of ML
STAR IVD User Software.
Waste Block P/N 185281
The waste block is a ML STAR IVD
Instrument part and besides its main
“tip waste” function it is needed for
checking tightness and positioning of
pipetting heads. These verifications
may be performed by the customer as
well.
Furthermore, for the check and
adjustment of Pressure Sensors (of
pipetting heads) a coupling section is
implemented into the waste block.
Toghether with the pressure transmitter
and the macro programs:
PIP_PRESSURE_SIGNALS_CHECK.
MCR
and
PIP_PRESSURE_SIGNALS_AUTOAD
JUSTMENT.MCR
the Pressure Sensors may be checked
and adjusted (necessary for TADM)