Hamilton Microlab STAR - Adjustment and Calibration

Microlab
®
STAR Service Manual
4-26
4.2.6 Adjustment and Calibration
For general information see section 6 Adjustment and Calibration on page 6-1.
It is particularly important and necessary to adjust and calibrate the Pipetting Arm,
the Pipetting Channels and the Autoload
7
.
Adjustment and Calibration can only be done using the Microlab
®
STAR Service
Software and the special adjustment / calibration tools.
7
Microlab
®
-STAR Instrument with Autoload Option only