EasyManua.ls Logo

Hamilton Microlab STAR - Adjusting Microlab STAR Pipetting Channel

Hamilton Microlab STAR
284 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Microlab
®
STAR Service Manual
1-2
1.1.1 ML STAR
Descriptions in this Manual often refer to Microlab
®
STAR instrument with Autoload
Option. Disregard such references if the instrument to be serviced is a Manual Load
Microlab
®
STAR.
1.1.2 ML STAR IVD
Additional Information for the Microlab
®
STAR IVD instrument will be found in each
chapter where components, procedures are different from or additional to the basic
Microlab
®
STAR instrument.
However, since the ML STAR IVD is not yet on the market at the time of writing,
further changes must be expected.
Once the ML STAR IVD is available, there will be a Service Manual update as well.
1.1.3 ML STAR Extensions
By “Extensions” we mean assemblies such as the Temperatured-Controlled Carrier,
Wash Station and iSwap. These components may ordered as an option, or later on
as update kits, when there is a need to upgrade an existing ML STAR Instrument in
the field.
1.1.4 Description of text icons for special notes
"Attention" notes are included in this manual to emphasize important and critical
instructions. They are accompanied by an exclamation mark symbol above the
notes and are printed in italics. Here is an example:
Attention: All special problems, warnings or important text will be accompanied by
this symbol at the appropriate point in the manual.
Items marked Note or Hint provide useful additional information. Carefully read
these text items as you will find them important for understanding the topic or
command in question.

Table of Contents

Other manuals for Hamilton Microlab STAR