Microlab
®
STAR Service Manual
4-24
4.2.5.6 Remote Access
It is the Customer’s responsibility to prepare the operating PC for remote access.
Ensure only read access is enabled.
• Overview
Steps Responsibility
1. Provide Infrastructure for Remote
Access (e.g. RAS-Server).
LAN manager at Customer site
2. Setup Account for Service engineer
(e.g. HamService).
LAN manager at Customer site
3. Setup Share on ML STAR IVD PC. LAN manager at Customer site, or PC
Administrator
4. Setup Access rights for Service
engineer on ML STAR IVD PC.
LAN manager at Customer site, or PC
Administrator
5. Means of Connection (e.g. Telephone
number), Account name and Password
for Service engineer.
LAN manager at Customer site
• Steps 1 and 2
are not elsewhere specified, because they are dependent on Network
infrastructure at Customer site.
• Step 3
is described below.
• Step 4
refer to section 4.2.5.5 Defining Access Rights (ML STAR IVD) on page 4-20 ff.
Then Select 'Lab Remote Service' from 'Local Users and Groups.
• Step 5
must be determined together with the LAN manager.
To Next Page
Loading...
