HIKVISION DS-K1T804A Series User Manual

5.
Oponal: Enable Mulple Shi Schedules and select the
eecve me period(s) from the added metables for the
persons.
Note
This is only available for shi with only one metable.
Mulple Shi Schedules
It contains more than one metables. The person can check
in/out in any of the metables and the aendance will be
eecve.
If the mulple shi schedules contains three metables:
00:00 to 07:00, 08:00 to 15:00 and 16:00 to 23:00. The
aendance of the person adopng this mulple shi
schedules will be eecve in any of the three metables. If
the person checks in at 07:50, it will apply the nearest
metable 08:00 to 15:00 to the person's aendance.
6.
Set the start date and end date.
7.
Set other parameters for the schedule.
Check-in Not Required
Persons in this schedule do not need to check-in when they
come to work.
Check-out Not Required
Persons in this schedule do not need to check-out when they
end work.
Scheduled on Holidays
On the holidays, this schedule is sll eecve and the
persons needs to go to work according to the schedule.
Eecve for Overme
The persons' overme will be recorded for this schedule.
8.
Click Save.
Set Person Schedule
You can assign the shi schedule to one or more persons. You can
also view and edit the person schedule details.
Before You Start
Add department and person in Person module. See Person
Management for details.
Steps
Note
The person schedule has the higher priority than department
schedule.
1.
Click Time & Aendance → Shi Schedule to enter the Shi
Schedule page.
2.
Click Person Schedule to enter Person Schedule page.
3.
Select the
organizaon and select the person(s).
4.
Select the
shi from the drop-down list.
5.
Oponal: Enable Mulple Shi Schedules and select the
eecve me period(s) from the added metables for the
persons.
88

HIKVISION DS-K1T804A Series Specifications

General

Brand	HIKVISION
Model	DS-K1T804A Series
Category	IP Access Controllers
Language	English