HIKVISION DS-K1T804A Series - Page 104

Note
This is only available for shi with only one metable.
Mulple Shi Schedules
It contains more than one metables. The person can check
in/out in any of the metables and the aendance will be
eecve.
If the mulple shi schedules contains three metables:
00:00 to 07:00, 08:00 to 15:00 and 16:00 to 23:00. The
aendance of the person adopng this mulple shi
schedules will be eecve in any of the three metables. If
the person checks in at 07:50, it will apply the nearest
metable 08:00 to 15:00 to the person's aendance.
6.
Set the start date and end date.
7.
Set other parameters for the schedule.
Check-in Not Required
Persons in this schedule do not need to check-in when they
come to work.
Check-out Not Required
Persons in this schedule do not need to check-out when they
end work.
Scheduled on Holidays
On the holidays, this schedule is sll eecve and the
persons needs to go to work according to the schedule.
Eecve for Overme
The persons' overme will be recorded for this schedule.
8.
Click Save.
Set Temporary Schedule
You can add a temporary schedule for the person and the person
will be assigned with the shi schedule temporarily. You can also
view and edit the temporary schedule details.
Before You Start
Add department and person in Person module. See Person
Management for details.
Steps
Note
The temporary schedule has higher priority than department
schedule and person schedule.
1.
Click Time &
Aendance → Shi Schedule to enter the Shi
Schedule Management page.
2.
Click Temporary Schedule to enter Temporary Schedule page.
3.
Select the
organizaon and select the person(s).
4.
Click one date or click and drag to select
mulple dates for the
temporary schedule.
5.
Select Workday or Non-Workday from drop-down list.
If Non-Workday is selected, you need to set the following
parameters.
Calculated as
89