Hioki 3560 - Page 80

68
────────────────────────────────────────────────────
7.4 Message Reference
────────────────────────────────────────────────────
Synta
x
*ESR?
Respons
e
synta
x
(If headers are ON)
*ESR data
(If headers are OFF)
data
Exampl
e
(If headers are OFF)
Transmission
*ESR?
Response
32
Synta
x
*IDN?
Respons
e
synta
x
HIOKI, 3560, 0, V2.00
First field Manufacturer’s name
Second field Model name
Third field Serial number
Fourth field Software version
Exampl
e
(If headers are ON)
Transmission
*IDN?
Response
IDN HIOKI,3560,0,V2.00
(If headers are OFF)
Transmission
*IDN?
Response
HIOKI,3560,0,V2.00
Synta
x
*OPC
Exampl
e
Transmission
RST;:MEAS:RES?;*OPC
This command sets the specified
bit to "1" when all *RST and
MEAS actions are complete.
F
unctio
n
This command returns the contents
of the standard event status registe
r
(SESR) in NR1 numeric data forma
t
(data) (ranging from 0 to 255), then
clears the register.
F
unctio
n
Queries device ID (manufacturer’s
name, model name, software
version.
Note
s
･ No header is affixed to the respons
e
message.
･ The *IDN? query is the last query
message of the program messages.
No further response is output.
F
unctio
n
This command sets the standard
event status register (SESR) bit0
(OPC bit) to "1" when all actions
specified by messages and occurring
before the *OPC command are
complete.
*ESR?
■ Queries out and clears the contents of the standard event status register (SESR).
*IDN?
■ Queries device ID.
*OPC
■ Sets the standard event status register bit0 (OPC bit) to "1."