Hitachi G200 - Checking Power Cable Connections on a Host Port Expansion Chassis

Note: Check the target power supply units and power cables only.
Do not touch other power supply units and power cables.
4. Log out and close the Maintenance Utility window.
Checking power cable connections on a host port expansion chassis
Using the following procedure, you can check whether the power cable on a
host port expansion chassis is loose or secure.
Procedure
1. In the Alert Detail window of the maintenance utility, click Close.
2. In the left pane, under Hardware, click Channel Board Box to check
the location of the power supply unit on the host port expansion chassis
fan (CHBBFAN).
Replacing a power supply 157
Service Guide for VSP Gx00 and VSP Fx00 Models