3. Expand the tree, and then right-click a storage system and click Other
Functions.
4. In Hitachi Device Manager - Storage Navigator, click the Maintenance
Utility menu, and then click Hardware to start the maintenance utility.
Starting from Hitachi Device Manager - Storage Navigator
Procedure
1. Launch a web browser from the console PC connected to the SVP, and
then start Device Manager - Storage Navigator.
2. Enter the following URL in the address field of your browser, and then
press Enter: http://[IP address of SVP]/module/sn2/0/index.do
3. In the Storage Device List window, click the picture of the registered
storage system.
4. Log in to Device Manager - Storage Navigator.
5. On the Maintenance Utility menu, click Hardware.
82 Replacing storage system components
Service Guide for VSP Gx00 and VSP Fx00 Models
To Next Page
Loading...
