Hitachi G200 - Removing and Installing Cache Flash Memory for a CBLM or CBLH Controller

Removing and installing cache flash memory for a CBLM or CBLH
controller
Before you begin
• Wear a wrist strap connected to the storage system to prevent part
failures caused by static electricity. Do not remove the wrist strap until you
finish the procedure.
• The controller must be removed from the storage system.
Procedure
1. Loosen the blue screw that secures the cache flash memory (CFM).
2. Open the lever.
3. Using both hands, hold the body of the CFM and remove it.
176 Replacing a controller
Service Guide for VSP Gx00 and VSP Fx00 Models