Hitachi G200 - 11 Replacing a Front End Module

11
Replacing a front end module
Before replacing a front end module, read the precautions and understand
the procedure for your front end module.
Controller 1 and Controller 2 must have the same number of front end
modules installed. For example, if you install a second front end module to
Controller 1, you must also install a new front end module to Controller 2.
You cannot add a front end module to one controller without adding a front
end module to the other controller.
□
Blocking a front end module
□
Replacing a front end module on a controller
□
Replacing a front end module on a host port expansion chassis
□
Restoring a front end module
Replacing a front end module 205
Service Guide for VSP Gx00 and VSP Fx00 Models