Installing a CBLM CBLH controller
Before you begin
• Wear a wrist strap connected to the storage system to prevent part
failures caused by static electricity. Do not remove the wrist strap until you
finish the procedure.
Procedure
1. With the right and left levers on the new controller opened completely,
insert the controller into the slot of the CBLM CBLH chassis.
Hold the controller with both hands and move it in a straight direction.
2. With the lever closed on the BKMF you removed, tighten the blue screw
to secure the BKMF.
3. Install the four BKMFs on the controller.
178 Replacing a controller
Service Guide for VSP Gx00 and VSP Fx00 Models
To Next Page
Loading...
