Hitachi G200 - CBLM Controller; CBLMCBLH with Front Panel Bezel

Number Item Description
12
STATUS
Green: Charging of the
battery in the backup
module is complete.
Blink green: Battery in the
backup module is charging
or discharging.
Red: Backup module can
be removed.
Blink red: Backup module
can be removed.
Blink red one time: Battery
failure
Off: Battery is not
installed, failure occurred,
or firmware is being
upgraded.
13
SAS port
N/A
14
Port LED Blue: Port link is
established.
15
Power supply unit
N/A
CBLM controller
The CBLM controller includes specific functional LEDs located on the front and
rear of controller and power supplies to provide its operating status.
CBLMCBLH with front panel bezel
The following table describes the definitions of the CBLMCBLH controller front
panel bezel LEDs.
Hardware description 39
Service Guide for VSP Gx00 and VSP Fx00 Models