Hitachi G200 - Page 38

Number
Item Description
1
Controllers Controller 1 (left) and
Controller 2 (right).
2
Front end module
N/A
3
CTL ALM LED Red: Controller can be
removed.
Blink red: Failure with the
power supply unit of the
controller.
Amber: LAN reset switch
was pressed.
4
BACKUP STTS LED Green: Power restoration
in progress following
power outage.
Fast blink green:
Restoring.
Slow blink green:
Restoring, or sequential
shutdown in progress.
5
CTL WARN LED Amber blink one time:
Failure with fan 0.
Amber blink two times:
Failure with fan 1.
6
Cache flash memory
N/A
7
LAN-RST switch Use only when instructed
by customer support.
8
LAN port Maintenance LAN port
(left) and user LAN port
(right).
9
Uninterruptible power supply (UPS) port
N/A
10
ALARM LED (for cache flash memory) Red: Cache flash memory
can be removed.
11
Backup module
N/A
38 Hardware description
Service Guide for VSP Gx00 and VSP Fx00 Models