Hitachi G200 - Replacing a Pcie Module

Replacing a PCIe module
Procedure
1. Disconnect the cable from the PCIe module to be replaced.
2. Loosen the two blue screws that secure the PCIe module.
3. Holding the blue screw, pull out and remove the PCIe module. Keep the
module straight to prevent to avoid jostling the components above and
below.
4. Insert the new PCIe module into the slot just before the "shield finger."
282 Replacing a PCIe module
Service Guide for VSP Gx00 and VSP Fx00 Models