open to the previous window session. This behavior persists until
you clear the browser cache.
4. Enter your login credentials:
a. In the User ID field, type maintenance.
b. In the Password field, enter the password configured during the
initial set up of the storage system.
5. Click Login.
6. In the Home window, click the NAS cluster from the Server Status
Console drop down list.
7. To log off, click Sign Out in the application pane of the NAS Manager
window, and then close the web browser. If the NAS Manager session
does not end, close the web browser.
EVS migration before servicing nodes
Procedure
1. Log on to NAS Manager.
2. In the Home window, click Cluster Configuration.
Replacing storage system components 97
Service Guide for VSP Gx00 and VSP Fx00 Models
To Next Page
Loading...
