Hitachi G200 - Using the Maintenance Utility; Starting from Hitachi Command Suite

Using the maintenance utility
To configure the storage system using the maintenance utility, start the
maintenance utility from Hitachi Device Manager - Storage Navigator.
Note:
• When adding cache memory or replacing controllers (Type Change) on the
VSP G200 model, specify the controller boards for adding cache memory
or replacement (Type Change), and then start Maintenance Utility.
• Click
in the window to see the help menu for the description of the
Maintenance Utility.
• To display the help, the settings for enlarging and reducing the display
might not be reflected in the help window, depending on the type or
version of your browser.
Starting from Hitachi Command Suite
Procedure
1. Start Hitachi Command Suite.
2. In the Hitachi Command Suite main window, click the Resources tab,
and then click Storage Systems from the tree view.
Replacing storage system components 81
Service Guide for VSP Gx00 and VSP Fx00 Models