3. Click Change proxy settings to open Internet Properties, and then
select the Security tab.
4. Click Trusted sites > Sites.
5. Uncheck Require server verification (https:) for all sites in this
zone.
6. In Add this website to the zone, enter the IP address of controller 1,
and then click Add and Close.
7. Use the same method in the previous step to add the IP address of
controller 2.
8. After returning to the Internet Properties window, click OK to close the
window.
Handling Java security messages
If you start the Update window of the Maintenance Utility, and the message
Application Blocked by Java Security or Application Blocked by
Security Settings appears, perform the following procedure.
Procedure
1. From the Windows start menu, click All Programs > Java, and then
click Configure Java.
2. Open the Java Control Panel.
3. In the Security tab, click Edit Site List in the Security tab.
4. Add the following URLs to the Exception Site List, and then click OK.
• <http://(IP address of controller 1)>
• <http://(IP address of controller 2)>
• <https://(IP address of controller 1)>
• <https://(IP address of controller 2)>
Note: If Security – HTTP Location is displayed when adding the
URL, click Continue.
5. Close the Java Control Panel, and then restart your web browser.
Contents in the Maintenance Utility window appear to be corrupt
If the contents displayed in the Maintenance Utility window appear to be
corrupt, exclude the maintenance utility from the compatibility view target.
In Internet Explorer, check the Compatibility View on the address bar. In
Internet Explorer versions 10 and earlier:
Procedure
1. Click Tools > Compatibility View setting.
2. Clear the Display intranet sites in Compatibility View check box and
the Display all websites in Compatibility View check box.
340 Troubleshooting the storage system
Service Guide for VSP Gx00 and VSP Fx00 Models
To Next Page
Loading...
