2. Loosen the blue screw that secure the fan, and then remove the fan.
3. Insert the new fan into the slot, and tighten the blue screw to secure the
fan.
4. Attach the front bezel.
Restoring a fan on a host port expansion chassis
Procedure
1. In the FAN tab, click Refresh to display the current fan status.
2. Confirm that the status of the replaced fan is Normal.
3. Log out and close the Maintenance Utility window.
Checking the screw on a host port expansion chassis fan
Using the following procedure, you can check whether the screw securing the
CHBB fan is loose or secure.
Procedure
1. In the Alert Detail window of the maintenance utility, click Close.
2. In the left pane, under Hardware, click Channel Board Box to check
the location of the host port expansion chassis fan (CHBB).
Replacing a fan 137
Service Guide for VSP Gx00 and VSP Fx00 Models
To Next Page
Loading...
