Replacing the CFM
Before you begin
• Wear a wrist strap connected to the storage system to prevent part
failures caused by static electricity. Do not remove the wrist strap until you
finish the procedure.
• Confirm that the storage system power is turned on.
• Use the maintenance utility to block the CFM.
• Confirm that the red STATUS LED for the CFM to be replaced is on.
• The red ALARM LED (CBSS/CBSL) or ALM LED (CBLM/CBLH) on the cache
flash memory (CFM) to be replaced is on.
Procedure
1. Loosen the blue screw securing the CFM.
2. Open the lever
3. Hold the CFM with both hands, and then pull it gently and remove it.
254 Replacing cache flash memory
Service Guide for VSP Gx00 and VSP Fx00 Models
To Next Page
Loading...
