Hitachi G200 - Restoring a Pcie Cable Connector

6. Connect the cable to the new PCIe cable connector.
7. Confirm that the red STATUS LED is off at the PCIe cable connector.
Restoring a PCIe cable connector
Procedure
1. At the Replace PCIe-cable Connecting Package window, click
Restore. A progress bar shows the replacement status.
2. When the progress bar goes away and the completion message appears,
click Close.
3. Click the PCPs tab in the Channel Board Box window and confirm that
the status of the new PCIe cable connector is Normal.
4. Log out and close the Maintenance Utility window.
Replacing a PCIe cable connector 295
Service Guide for VSP Gx00 and VSP Fx00 Models