Hitachi G200 - Page 317

VSP G400,
G600VSP F400,
F600 part
Main window Tab Status link
DKBs Status
LAN boards Status
PSs Status
Small Form-Factor
Pluggable window
N/A SFP Status
Drive tray Drive Box window Drives Status
ENCs Status
PSs Status
Host port expansion
chassis
Channel Board Box
window
CHBs Status
SFP Status
SWPKs Status
Fans Status
PCPs Status
PS SFP Status
Small Form-Factor
Pluggable window
N/A SFP Status
NAS module
This is displayed
when the firmware
for NAS modules is
installed.
Main window - NAS Module Status window Unified Hypervisor
Hypervisor Network Module
NAS Unified Firmware
The description of Status is listed in the following tables.
Status
Part frame color Description
Normal
N/A Indicates normal status.
Warning
Amber
• Possible parts failure.
• Possible parts failure due
to other related parts.
• Failure caused by other
related parts. Replace
failed part.
None NAS Module Status-limited
Any of the following failures
occur:
• NAS module hardware
fails.
• NAS-module-related
software is experiencing
issues.
• Warning is shown due to
possible failure of other
components. Change part
to return status to Active.
Troubleshooting the storage system 317
Service Guide for VSP Gx00 and VSP Fx00 Models