Hitachi G200 - Page 321

Status Part frame color Description
NAS Unified firmware is
normal.
Active (Not Redundant)
None NAS Unified Firmware
Status-limited
NAS Unified firmware
detected a failure in either
cluster.
Active (Warning)
None NAS Unified Firmware
Status-limited
NAS Unified firmware
detected trouble in either
cluster.
Inactive None NAS Module Status-limited
No trouble occurs, but start-
up is not completed.
Initial
None Unified Hypervisor Status-
limited
Unified Hypervisor is
initialized.
Failure Processing
None Unified Hypervisor Status-
limited
Unified Hypervisor is being
blocked.
NAS Unified Firmware
Status-limited
NAS Unified firmware is being
blocked.
Failure Processing
(Stopped)
None Hypervisor Network
Module Status-limited
Hypervisor Network Module is
stopped.
Failure Processing
(Restarting)
None Hypervisor Network
Module Status-limited
Hypervisor Network Module is
restarting.
Processing
None NAS Unified Firmware
Status-limited
NAS Unified firmware is
starting or stopping. (Case 2)
Starting
None Unified Hypervisor Status-
limited
Troubleshooting the storage system 321
Service Guide for VSP Gx00 and VSP Fx00 Models