Hitachi G200 - Page 325

Status Part frame color Description
Failed (service)
None NAS Unified firmware
status-limited
Failure occurred in the file
storage function of NAS
Unified firmware.
Failed (unknown)
None Unified Hypervisor status-
limited
Unified Hypervisor is blocked.
Blocked
Red Only parts requiring blockage
instruction by using
Maintenance Utility are
displayed and in an
exchangeable status.
Not fix
Amber SFP Status-limited
The classification is in an
undetermined status.
Warning (Port n failed)
Amber Drive Status-limited
The drive port is in a failure
status.
n: Failure drive port number
Copying n % (TYPE to
DRIVE)
Amber Drive Status-limited
Copying is in progress.
n: Copy progress rate
TYPE: Correction copy,
Copy back, Dynamic
sparing, Drive copy
DRIVE: Copy destination
drive location (If the drive is a
copy destination drive in
Correction copy, DRIVE is
displayed as this Drive.)
When multiple copy statuses
exist, a line break is added to
every copy status line, and
then the information is
displayed.
Copying n % (TYPE to
DRIVE)
Amber Drive Status-limited
Copying is in progress.
n: Copy progress rate
TYPE: Copy back, Dynamic
sparing, Drive copy
Troubleshooting the storage system 325
Service Guide for VSP Gx00 and VSP Fx00 Models