Status Part frame color Description
NAS Unified firmware is being
installed.
None NAS Module Status-limited
Unified Hypervisor is not
starting.
Active
None NAS Module Status-limited
This indicates normal status.
Unified Hypervisor Status-
limited
Unified Hypervisor started
completely.
Hypervisor Network
Module Status-limited
Hypervisor Network Module
operates normally.
NAS Unified Firmware
Status-limited
NAS Unified firmware is
normal.
Active (Not Redundant)
None NAS Unified Firmware
Status-limited
NAS Unified firmware
detected a failure in either
cluster.
Active (Warning)
None NAS Unified Firmware
Status-limited
NAS Unified firmware
detected trouble in either
cluster.
Inactive None NAS Module Status-limited
No trouble occurs, but start-
up is not complete.
Initial
None Unified Hypervisor Status-
limited
Unified Hypervisor is
initialized.
Failure Processing
None Unified Hypervisor Status-
limited
Troubleshooting the storage system 327
Service Guide for VSP Gx00 and VSP Fx00 Models
To Next Page
Loading...
