Honeywell Series 8 I/O - Figure 31 Main Tab

5. Series 8 I/O Configuration Form Reference
5.6. Configuring the Main tab - IOM block
R500 Series 8 I/O User's Guide 111
April 2017 Honeywell
Figure 31 Main tab
To configure the Main tab, perform the following steps.
Step
Action
1
Enter a Tag Name that is more meaningful to you than its default pre-
assigned number (for example, Test Strategy Digital Input module).
2
Item name is based on relationship established in Enterprise Builder.
3
Enter an optional Module Description to explain the I/O Module's function.
4
Enter appropriate values for IOM Number to match the plug-in IOM jumper
number. If necessary, press F1 to access online help for assistance during