Honeywell Series 8 I/O - Inspecting the Series 8 I;O Library; Inspecting IOM Function Blocks; Figure 2 Series 8 I;O Library

2. Series 8 I/O Planning and Design
2.6. Supported Series 8 I/O options
R500 Series 8 I/O User's Guide 33
April 2017 Honeywell
Inspecting the Series 8 I/O library
Series 8 I/O Module function blocks and I/O Channel blocks are housed in the Series 8
I/O library of Control Builder.
Figure 2 Series 8 I/O library
Inspecting IOM function blocks
All IOM function blocks are associated with (children of) an IOLINK function block.
The Series 8 I/O IOM function blocks are as follows:
 ANALOG INPUT WITH HART
 Analog Input
 TC/RTD
 Analog Output
 ANALOG OUTPUT WITH HARTAnalog Output with HART
 Digital Input 24VDC
 Digital Input Sequence of Events
 Digital Output 24VDC