Honeywell Series 8 I/O - IOLINK Icons; Table 56 IOLINK Icons

7. Series 8 I/O Operations
7.2. Reviewing the Control Builder icons
R500 Series 8 I/O User's Guide 207
April 2017 Honeywell
If icon is . . .
Then, it represents . . .
both yellow
Primary, secondary may or may not be synched
front yellow
back red
Primary, no secondary
IOLINK icons
The following table summarizes the various appearances that an IOLINK block icon can
assume based on view and current IOLINK state. IOLINK blocks apply only to the
primary or non-redundant IOM block, and do not have matching blocks for secondary
IOM.
Table 56 IOLINK icons
If Icon is . . .
Then, it represents . . .
Project tab
gray
IOLINK associated with configured non-redundant or
primary IOM.
Monitoring tab
gray/arrow
Control Builder / Control Data Access (CDA) server is
currently establishing communication to the IOLINK
blue
IOLINK is inactive
yellow
IOLINK is initializing
green
IOLINK is active
red/black exclamation
Communication to the IOLINK is unavailable.