Honeywell Series 8 I/O - Table 31 Server Display Tab Parameters

5. Series 8 I/O Configuration Form Reference
5.12. Configuring Server Displays tab - IOM block
R500 Series 8 I/O User's Guide 127
April 2017 Honeywell
Table 31 Server Display tab parameters
Plain text
Parameter name
User
configurable
Notes
Point Detail
Display
SCANPNTDTL
Yes
By default, a Display template is
already entered into Point Detail
Display box (for example,
sysDtlFTEB.dsp). This template
can be used for creating your own
display or it can be used as is,
provided that your function block
name matches the name built into
detail display that is supplied as a
template.
Group Detail
Display
SCANGRPDTL
Yes
By default, a Display template is
already entered into the Group
Detail Display box (for example,
sysGrpFTEB.dsp). This template
can be used for creating your own
display or it can be used as is,
provided that your function block
name matches the name built into
detail display that is supplied as a
template.
Associated
Display
SCANASSOCDSP
Yes
Name of the Server display to be
associated with this function block.
Number of
Trends
TREND.NUMPARA
MS
Yes
Defines the number of trend
parameters to be included in the
Trends Configuration table.
Trend #
-
Yes
Defines Trend number to be
associated with this trend
parameter.
Trend Position
Yes
Defines position of the pen that is
used to trace assigned parameter
on Station Trend display.
Trend Parameter
-
Yes
Valid parameter name for a
parameter associated with given
point that is configured for history
collection.