Honeywell Series 8 I/O - Fta1 Fail; Fta2 Fail; Calbabrt; Badcalrf

13. Series 8 I/O Alarms and Failures
13.2. Reviewing IOM soft failures
274 Series 8 I/O User's Guide R500
Honeywell April 2017
36 FTA1FAIL
TC/RTD :FTA 1 has a soft failure
Diagnostic check:
Check TC/RTD FTA 1
Cause:
TC/RTD FTA 1 has a soft failure.
Solution:
Check TC/RTD FTA 1
37 FTA2FAIL
TC/RTD FTA 2 has a soft failure
Diagnostic check:
Check TC/RTD FTA 2
Cause:
TC/RTD FTA 2 has a soft failure.
Solution:
Check TC/RTD FTA 2
38 CALBABRT
Calibration of a module has aborted due to a failure
Diagnostic check:
Cause:
Calibration of a module has aborted due to a failure
Solution:
39 BADCALRF
Internal calibration test voltages out of range.
Diagnostic check:
None - Internal calibration test voltages out of range.
Cause:
Internal calibration test voltages out of range.
Solution:
Replace Analog Input or Analog Output IOM.