Honeywell Series 8 I/O - Block Icons; Channel Icons; Table 57 Block Icons; Table 58 Channel Icons

7. Series 8 I/O Operations
7.2. Reviewing the Control Builder icons
208 Series 8 I/O User's Guide R500
Honeywell April 2017
If Icon is . . .
Then, it represents . . .
red/white exclamation
Communication to the IOLINK is available, but the IOLINK
is in a failed state.
Block icons
The following table summarizes the various appearances that a block icon can assume
based on view and current block state. The faceplate of the block varies to reflect the
block type.
Table 57 Block icons
If Icon is . . .
Then, it represents . . .
Project tab
gray
Block added to Project.
Channel icons
The following table summarizes the various appearances that a channel icon can assume
based on view and current block state.
Table 58 Channel icons
If Icon is . . .
Then ICONSTAE parameter value is . . .
yellow
Database is invalid
red
Error
blue
Block is active